Sennheiser HD-E2020-D Specifications download pdf (Page 31)

 Press the SET button  to permanently store the

selected channel.

“STORED” briefly appears on the display. The

transmitter now transmits on the selected channel.

The last menu selected is shown on the display.

To exit the operating menu:

 Select the “EXIT“ menu by pressing the / rocker

button  and press the SET button .

The standard display is shown.

Or:

 Repeatedly press the ON/OFF button  until the

standard display is shown.

Setting the receiver channel

In order for the receiver to receive the transmitter

signal, both transmitter and receiver have to be set to

the same channel.

To manually set the receiver channel:

 Press the / rocker button for channel

selection .

The selected channel is shown on the channel

display .

If the transmitter is transmitting on this channel,

the receiver’s RF signal indication  indicates the

field strength of the received RF signal.

Notes:

y By pressing and holding the / rocker button for

channel selection , the display cycles

continuously (repeat function).

y After channel 6, the display will return to channel 1.



1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

No comments

Sennheiser HD-E2020-D Specifications Page 31