Sennheiser HD-E2020-D Specifications download pdf (Page 32)

Setting the receiver channel(s) using the channel

copy function

The channel copy function lets you simultaneously set

a maximum of 19 receivers in the charging case to the

same channel. This is achieved by copying the current

channel of the receiver placed into the charging

compartment with channel copy function (master) 

to all other receivers in the charging case.

 Place all receivers which are to be set to the same

channel into the charging compartments for

receivers (slaves) .

 Switch on the receiver whose channel you want to

copy.

 Place this receiver into the charging compartment

with channel copy function (master) . The

receiver must be switched on.

The LED COPY AVAILABLE  lights up green as long

as the channel copy function is available.

 Press the COPY button  to start the channel copy

function.

The LC displays of all receivers which are

successfully set to the same channel light up.

Notes:

y If the receivers’ built-in rechargeable batteries are

not discharged, you can use the channel copy

function even when the charging case is not

connected to the mains.

y If you do not press the COPY button  on the

receiver placed into the charging compartment

with channel copy function (master) , the

receiver automatically switches off after approx.

two minutes.

 

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 49 50

No comments

Sennheiser HD-E2020-D Specifications Page 32