31
Problem Possible cause and what to do
Active noise compensation but
very low volume communication
The volume control is set too low.
왘 Check the volume setting of the headset.
The headphone connection has been pulled out (except HMEC 305, HMEC 305-C and
HMEC 306).
왘 Check to see if the headphone jack plug is correctly connected.
Active noise compensation but
reduced intelligibility
The microphone connection has been pulled out (except HMEC 305, HMEC 305-C and
HMEC 306).
왘 Check to see if the microphone jack plug is correctly connected.
Communications in one ear only
(only HMEC 300, HMEC 302,
HMEC 306 and HMEC 306)
You are using a stereo intercom system but the headset is set to mono operation.
왘 Set the Mono/Stereo switch to “Stereo”.
You are receiving a mono source but the headset is set to stereo operation.
왘 Set the Mono/Stereo switch to “Mono”.
HMEC300US.book Seite 31 Mittwoch, 7. April 2004 3:24 15
Comments to this Manuals