Sennheiser SKM 500 G2 - 02-06 Specifications download pdf (Page 42)

 Push the battery compartment into the

radiomicrophone’s body.

 Screw the display section tight.

Note:

For accupack operation of the radiomicrophone, only use

the BA 2015 accupack in order to ensure optimum

operational reliability. For charging the accupack, only

use the L 2015 charger. Both the accupack and the

charger are available as accessories.

The accupack is fitted with an integrated sensor which is

– via a third contact – monitored by the electronics of

the radiomicrophone and the charger. The sensor is

necessary for the following control purposes:

y The taking into account of the different voltage

characteristics of primary cells (batteries) and

accupacks. The battery status indications on the

displays, the transmission of transmitter battery

status information to the rack-mount receivers and

the switch-off thresholds at the end of the operating

time are corrected correspondingly. Due to the

missing sensor, individual rechargeable battery cells

will not be identified as ac cupacks.

y The monitoring of the accupack temperature during

charging in the L 2015 cha rger.

Changing the microphone head

 First remove the batteries/accupack as described above

and leave the radiomicrophone open.

 Unscrew the sound inlet basket.

 Loosen the screw and put it to one side.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 123 124

No comments

Sennheiser SKM 500 G2 - 02-06 Specifications Page 42