Sennheiser SKM 500 G2 - 02-06 Specifications download pdf (Page 52)

In this case, “U.01” briefly appea rs on the display .

 Use the / buttons to select the desired transmission

frequency. Transmission frequencies are tunable in

25-kHz steps within a switching bandwidth of 36 MHz

max. For intermodulation-free frequencies, please refer

to the enclosed frequency table.

Adjusting the sensitivity –

SENSIT

Via the “SENSIT” menu, yo u can a djust the

radiomicrophone’s input sensitivity.

The input sensitivity is adjusted too high when close talking

distances, speakers with loud voices or loud music passages

cause overmodulation in the transmission link. When the

audio input level is excessively high (AF peak), the level

display for audio signal “AF”  shows full deflection.

If, on the other hand, the sensitivity is adjusted too low, the

transmission link will be undermodulated, which would

result in a signal with high background noise.

The sensitivity is correctly adjusted when the level display

for audio signal “AF” shows full deflection only during

the loudest passages.

Note:

For monitoring the adjusted sensitivity, the transmitter’s

level display for audio signal “AF” always indicates the

audio level – even if the transmitter is muted.

The following figures are a guide to the best settings:

y Loud music/vocals: –30 to –20 dB

y Presentations: –20 to –10 dB

y Interviews: –10 to 0 dB



1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 123 124

No comments

Sennheiser SKM 500 G2 - 02-06 Specifications Page 52