Sennheiser EK3253 Specifications download pdf (Page 15)

Mounting and connecting remote antennas

Use a remote antenna when the transmitter position is not the

best antenna position for optimum transmission. You can

choose between two antennas (

see “Accessories” on page 30):

y A 2003 UHF passive directional antenna

y A 1031 passive omni-directional antenna

Use a low-attenuation 50-Ω cable to connect the antenna to the

transmitter. Ready-made antenna cables from Sennheiser are

available as accessories with length of 5 m and 10 m. If possible,

use a short antenna cable and as little connections as possible,

since long cables and many connectors lead to an attenuation

of the antenna signal. Position antennas in the same room in

which the transmission takes place! Maintain a minimum

distance of 1

m from metal objects (including reinforced

concrete walls)!

Connecting the mixing console

Connect the mixing console to the XLR-3 sockets AF IN (L) 

and AF IN (R) + MONO .

Note

Any unit that is only suitable for mono operation must be

connected to the XLR-3 socket AF IN (R) + MONO

. In this

case, set the transmitter to mono operation (

see “Switching

between mono and stereo operation” on page 23).

A 2003

A 1031

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

No comments

Sennheiser EK3253 Specifications Page 15