Sennheiser EK3253 Specifications download pdf (Page 22)

Care and maintenance

Cleaning the transmitter

왘 Before cleaning, disconnect the transmitter from the mains.

왘 If necessary, you can clean the transmitter with a slightly

damp cloth. Do not use any cleansing agents or solvents.

Replacing the fuse

왘 Disconnect the transmitter completely from the mains by

pulling out the mains connector from the wall socket.

왘 Use a screwdriver to loosen the fuse holder .

왘 Remove the fuse holder with the inserted fuse.

왘 Replace the fuse by a new fuse with the same rating.

왘 Reinsert the fuse holder. Make sure to insert the fuse holder

the correct way round.

The set voltage is shown at the top of the fuse holder.

왘 Reconnect the transmitter to the mains and and switch it on

again.

Water can damage the electronics of

the transmitter!

Water entering the housing of the transmitter

can cause a short-circuit and damage the

electronics.

왘 Only use a slightly damp cloth to clean the

transmitter.

Electric shock hazard!

In case of improper handling, you may come into

contact with electrically conducting parts and

receive an electric shock when removing the

fuse holder.

왘 Before removing the fuse holder, pull out the

mains connector from the wall socket.

CAUTION!

WARNING!

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

No comments

Sennheiser EK3253 Specifications Page 22