Sennheiser EVOLUTIONWIRELESS SKP 100 User Manual download pdf (Page 14)

Adjusting settings via the operating menu

Adjusting settings via the operating

The main menu “Menu”

Adjusting the input sensitivity – “Sensitivity”

Adjustment range: 0 to –48 dB, adjustable in steps of 6 dB

The transmitter’s audio level display “AF” always indicates the audio level,

even if the plug-on transmitter is muted, e.g. allowing you to check the

adjusted sensitivity before live operation.

Selecting the frequency bank and the channel manually –

“Frequency Preset”

When you are in the “Frequency Preset” menu item, the RF signal is

deactivated.

Overview of the frequency banks and channels:

Make use of the possibility to adjust settings via the operating

menu of your receiver and to transfer these settings to the plug-

on transmitter.

For more information, refer to the instruction manual of the

receiver. The relevant information is marked with the sync icon.

Input

sensitivity

adjusted ...

Effect/display

... too high Close talking distances, speakers with loud voices or

loud music passages cause overmodulation in the trans-

mission link. The audio level display “AF”  shows full

deflection for the duration of the overmodulation.

... correctly The audio level display “AF”  shows full deflection

only during the loudest passages.

... too low The transmission link is undermodulated. This results in

a signal with high background noise.

Adjust a low input sensitivity when using condenser microphones,

adjust a high input sensitivity when using dynamic microphones.

Frequency bank Channels Type

“1” to “20” up to 12 per

frequency bank

System bank:

frequencies are factory-preset

“U” up to 12 User bank:

frequencies are freely selectable

–12 dB

Sensitivity

– 12 dB

Sensitivity

–36 dB

Sensitivity

“Stored”

Call up

“Sensitivity”

Select the desired

setting

Store the setting

SET

MHz

533.875

B.Ch: 20.12

MUTE



B.Ch:

5.12

Frequency Preset

B.Ch:

792.525MHz

Frequency Preset

5.12

B.Ch:

Frequency Preset

1.12

Call up “Frequency

Preset”

Select the frequency

bank and confirm

Select the channel;

store the setting

“Stored”

818.850MHz

SET

SKP100_529675_0409_Sp9.book Seite 13 Donnerstag, 9. April 2009 1:48 13

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments

Sennheiser EVOLUTIONWIRELESS SKP 100 User Manual Page 14

Comments to this Manuals

Related products and manuals for Satellite Sennheiser EVOLUTIONWIRELESS SKP 100