Sennheiser SK 500 G3 User Manual download pdf (Page 13)

Using the bodypack transmitter

To establish a transmission link, proceed as follows:

1. Switch the receiver on (see the instruction manual of

the receiver).

2. Switch the bodypack transmitter on (see next section).

The transmission link is established and the display

backlighting of the receiver changes from red to orange.

If you cannot establish a transmission link between body-

pack transmitter and receiver, refer to the chapter

“Synchronizing the bodypack transmitter with the receiver

– individual operation” on page 28.

Switching the bodypack transmitter on/off

왘 Push the two battery compartment catches  and open

the battery compartment cover .

To switch the bodypack transmitter on (online operation):

It is vital to observe the notes on frequency

selection on page 28.

왘 Briefly press the ON/OFF button .

The bodypack transmitter transmits an RF

signal.

The standard display “Frequency/Name”

appears on the display panel. The red ON LED 

lights up and the transmission icon  is

displayed.

You can switch the bodypack transmitter on and

deactivate the RF signal on switch-on. For more

information, see page 13.











1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

No comments

Sennheiser SK 500 G3 User Manual Page 13