Sennheiser SK 500 G3 User Manual download pdf (Page 25)

Adjusting settings via the operating menu

The extended menu “Advanced Menu”

Setting transmission frequencies and frequency banks –

“Tune”

Via the “Tune” menu item, you can set a transmission

frequency to be stored in the current channel or you can

select a different channel in one of the frequency banks

“U1” to “U6” and assign this channel a transmission

frequency.

Setting a transmission frequency for the current channel

왘 Set the desired frequency.

Selecting a frequency bank and a channel and assigning

this channel a frequency

When you have selected one of the system banks

and then select the “Tune” menu, the bodypack

transmitter automatically switches to channel 1 of

the frequency bank “U1”. In this case, “U1.1” briefly

appears on the display panel.

Upon delivery, the channels of the frequency banks

“U1” to “U6” are not assigned a transmission

frequency.

When you are in the “Tune” menu item, the RF

signal is deactivated.

It is vital to observe the notes on frequency

selection on page 28.

왘 Press the rocker button until the “Tune” menu

item appears.

왘 Press the SET button.

The frequency selection appears.

왘 Press the SET button.

Your settings are stored.

You are back to the operating menu.

왘 Press the rocker button until the “Tune” menu

item appears.

왘 Keep the SET button pressed until the frequency

bank selection appears.

Select the MHz

value and confirm

Select the kHz

value; store the

setting

542.625 MHz

Tune

544.625 MHz

B.Ch: U1. 1 B.Ch: U1. 1

Tune

Call up “Tune”

Advanced

Tune

“Stored”

542.625 MHz

SET SET

SET

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Comments to this Manuals

No comments

Sennheiser SK 500 G3 User Manual Page 25

Comments to this Manuals

Related products and manuals for Satellite Sennheiser SK 500 G3