Sennheiser EW 500-935 G3 - FREQUENCY SHEETS Instruction Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 30
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
16
Adjusting settings via the operating menu
Adjusting settings via the operating menu
The main menu “Menu
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to –48 dB, adjustable in steps of 6 dB
The transmitter’s audio level display “AF always indicates the audio
level, even if the radio microphone is muted, e.g. allowing you to check the
adjusted sensitivity before live operation.
The following figures are a guide to the best settings:
Selecting the frequency bank and the channel manually –
“Frequency Preset”
When you are in the “Frequency Preset” menu item, the RF signal is
deactivated.
Make use of the possibility to adjust settings via the operating
menu of your receiver and to transfer these settings to the radio
microphone. For more information, refer to the instruction
manual of the receiver. The relevant information is marked with
the sync icon.
For more detailed information on the operating menu, visit the
SKM 500 G3 product page at www.sennheiser.com.
Input sensitivity
adjusted ...
Effect/display
... too high Close talking distances, speakers with loud
voices or loud music passages cause over-
modulation in the transmission link.
The audio level display “AF shows full
deflection for the duration of the over-
modulation.
... correctly The audio level display “AF shows full
deflection only during the loudest passages.
... too low The transmission link is undermodulated. This
results in a signal with high background noise.
Transmission situation Sensitivity setting
Loud music/vocals 48 to 18 dB
Presentations 18 to 12 dB
Interviews 12 to 0 dB
Menu
–12 dB
Sensitivity
– 12 dB
Sensitivity
–36 dB
Sensitivity
“Stored”
Call up
“Sensitivity”
Select the desired
setting
Store the setting
MHz
543.200
B.Ch: 20.32
MUTE
P
AF
Menu
B.Ch:
5.14
B.Ch:
MHz
543.200
Frequency Preset
Frequency Preset
5.14
B.Ch:
MHz
Frequency Preset
1.14
Call up “Frequency
Preset»
Select the
frequency bank
and confirm
Select the channel;
store the setting
“Stored”
543.200
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Comments to this Manuals

No comments