Sennheiser EW 500-935 G3 - FREQUENCY SHEETS Instruction Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 30
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
19
Adjusting settings via the operating menu
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
The radio microphone adds an inaudible pilot tone to the audio signal. The
receiver detects and evaluates the pilot tone, and is thus able to identify
the signal of the matching transmitter and mute all others. The pilot tone
supports the receiver’s squelch function.
Devices of the ew 500 G1 series (generation 1) do not support the pilot
tone function. Therefore, please observe the following when combining a
radio microphone or receiver of the ew 500 G3 series (generation 3) with
devices from an earlier evolution wireless generation:
Adjusting the contrast of the display panel – “LCD Contrast
You can adjust the contrast of the display panel in 16 steps.
Loading the factory-preset default settings – “Reset”
When resetting the radio microphone, only the selected settings for the
pilot tone and for the frequency banks “U1” to “U6” remain unchanged.
For an overview of the factory-preset default settings, refer to the
supplied frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the radio microphone.
For information on software updates, visit the SKM 500 G3 product
page at www.sennheiser.com.
Radio microphone Receiver Make sure to ...
w G3/ w G2 w G3/ w G2
... activate the pilot tone func-
tion on both radio microphone
and receiver.
w G3 w G1
... deactivate the pilot tone
function on the ew 500 G3
radio microphone.
w G1 w G3
... deactivate the pilot tone
function on the ew 500 G3
receiver.
Call up
“Pilot Tone”
Select the desired
setting
Store the setting
Name
Advanced
Menu
Pilot Tone
Active
Active
Pilot
Inactive
Pilot
“Stored”
Select the desired
setting; apply the
setting
Call up “Reset”
Advanced
Menu
Reset
Yes
Reset
“Stored”
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 29 30

Comments to this Manuals

No comments