Sennheiser CU1 User Manual download pdf (Page 10)

ADN CU1 | 9

Preparing the ADN CU1 central unit for use

The “Conference Manager” software can be run in two different ways:

1. As a program on the central unit’s built-in PC.

You have to connect a screen, keyboard, and mouse to the central unit (see

page 13).

2. As a program on a Windows PC.

You have to install the “Conference Manager” software on the PC and integrate

the PC together with the central unit in a network (see page 13).

Input and output of audio signals

Via XLR sockets, you can feed audio signals to the floor channel or output the floor

channel.

For recording a conference on a USB mass storage device, you can use the recording

function of the ADN CU1 central unit, which saves the floor channel and all channels

of the conference units as audio files in wav format.

Integration into a media control system

The ADN conference system can be completely integrated into a media control sys-

tem. You can monitor and control all functions of the conference system via the

programmable commands of your media control system. For information on the

integration into a media control system, refer to the detailed instruction manual

“ADN Conference System”).

Preparing the ADN CU1 central unit

for use

Setting up the central unit on a flat surface

왘 Make sure that the air vents are not covered or blocked.

왘 Place the central unit on a flat surface as shown.

Connecting the central unit to the mains

왘 First connect the mains cable (supplied) to the mains socket D.

왘 Connect the mains cable to the mains power supply.

The ADN CU1 central unit is now ready for operation.

Conference Manager software

ADN CU1

For information on how to mount the central unit into a 19” rack, refer to

the detailed instruction manual “ADN Conference System”.

CAUTION

Product damage due to unsuitable mains cables or power outlets!

An unsuitable power supply can damage the product.

왘 Only use the mains cable (supplied) for connecting the product to the mains.

왘 Only use multi-outlet power strips or extension cables with protective ground

contacts.

왘 Only use mains cables with a 3-pin connector.

100-240V~

50/60Hz 240W

KA_ADN-CU1_546415_0911_SP13.book Seite 9 Donnerstag, 1. September 2011 11:00 11

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Sennheiser CU1 User Manual Page 10

Comments to this Manuals

Related products and manuals for Unknown Sennheiser CU1