Sennheiser SYSTEM 2015 Specifications download pdf (Page 43)



To release individual channels, select the desired channel by using the





rocker button (UP/DOWN). (By briefly pressing the button, the

display jumps either forwards or backwards to the next channel; by hol-

ding down the button, the display cycles continuously.)

Note:

You can display the frequency stored in the selected channel. To do so,

press the

SET

button and the



button (UP) simultaneously.



Briefly press the

SET

button. The selected channel can now be accessed

by the user. “ACCESS” briefly appears on the display and the display

then displays the next channel that can be released.



Have you released all required channels as described above? Store your

settings by pressing the

SET

button until “STORED” appears on the dis-

play.

Selecting the frequencies to be stored in the channel bank “U”

TUNE

Via the “

TUNE

” menu, you can select the frequencies to be stored in the

channel bank “U” (user bank). When selecting the “

TUNE

” menu, the trans-

mitter or receiver automatically switches to the channel bank “U”.

Note:

Always assign the same frequency to the same channel on both trans-

mitter and receiver.



Use the





rocker button (UP/DOWN) to select the channel for which

you want to set the frequency.



Press the

SET

button to confirm your selection.

The currently set fre-

quency is displayed.



Use the





rocker button (UP/DOWN) to select the desired transmis-

sion or receiving frequency. The frequencies are tunable in 25-kHz

steps within a switching bandwidth of 36 MHz max. For intermodula-

tion-free frequencies, please refer to the enclosed frequency table.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 60 61

Comments to this Manuals

No comments

Sennheiser SYSTEM 2015 Specifications Page 43

Comments to this Manuals

Related products and manuals for FM transmitters Sennheiser SYSTEM 2015