19
Adjusting settings via the operating menu
For information on how to use the lock mode, refer to page 12.
The extended menu “Advanced Menu”
Setting transmission frequencies and frequency banks – “Tune”
When you have selected one of the system banks and then select the
“Tune” menu, the bodypack transmitter automatically switches to
channel 1 of the frequency bank “U1”. In this case, “U1.1” briefly appears
on the display panel. Upon delivery, the channels of the frequency banks
“U1” to “U6” are not assigned a transmission frequency.
When you are in the “Tune” menu item, the RF signal is deactivated.
Via the “Tune” menu item, you can set a transmission frequency to be
stored in the current channel or you can select a different channel in one
of the frequency banks “U1” to “U6” and assign this channel a transmis-
sion frequency. It is vital to observe the notes on frequency selection on
page 22.
Setting a transmission frequency for the current channel
왘 Set the desired frequency.
Selecting a channel and assigning this channel a frequency
왘 Set the desired frequency bank and the desired channel.
왘 Set the desired frequency.
왘 Press the rocker button to select the desired setting.
왘 Press the SET button to store the setting.
왘 Press the rocker button until the “Tune” menu item appears.
왘 Press the SET button.
The frequency selection appears.
왘 Press the SET button.
Your settings are stored.
You are back to the operating menu.
왘 Press the rocker button until the “Tune” menu item appears.
왘 Press the SET button until the frequency bank selection
appears.
왘 Press the SET button.
The frequency selection appears.
SET
SET
Select the MHz
value and confirm
Select the kHz
value; store the
setting
543 .200 MHz
Tune
544.200 MHz
B.Ch: U1.1 B.Ch: U1.1
Tune
Call up “Tune”
Advanced
Menu
Tune
“Stored”
543.200 MHz
SET SET
SET
SET
SET
Select the
frequency bank
and confirm
Select the
channel;
store the setting
Tune
B.Ch: U1. 1 B.Ch: U1. 1
Tune
Call up “Tune”
(special function)
Advanced
Menu
Tune
“Stored”
543.200 MHz 543.200 MHz 543.200 MHz
SET SET
SET
SET
Comments to this Manuals