Sennheiser WiCOS User Manual download pdf (Page 43)

Running a conference

If you are using the WiCOS C chairman unit, the set operating mode of the

conference unit and the voting result cannot be displayed. You can

nevertheless conduct voting session.

왘 Via the web server, set the function of the selection key A 8 and B 9

to “Start/Stop Voting” (see page 65).

왘 Start or stop voting session and delete voting results using the

selection key

A 8 and B 9 (for more information, see page 38).

As long as you keep the key 8 or 9 pressed, the LEDs next to the keys

light up.

Setting the volume of the conference units’ loudspeakers

With the WiCOS CV or WiCOS C chairman units, you can set the loudspeaker

volume of all conference units.

If you are using the WiCOS CV chairman unit:

왘 Keep the ABSTAIN key C pressed until the “volume adjustment mode

for loudspeakers” is shown on the multi-function display

The multi-function display switches between “voting mode”, “volume

adjustment mode for loudspeakers” and “media control mode”.

왘 Press the

– selection key A 8 to increase the loudspeaker volume or

– selection key B 9 to reduce the loudspeaker volume.

The loudspeaker volume is changed. The multi-function display 7

shows the volume of the conference units’ loudspeakers N.

If you are using the WiCOS C chairman unit:

왘 Via the web server, set the function of the selection key A 8 and B 9

to “Volume Control” (see page 65)

C CV D DV

With the WiCOS C chairman unit, you cannot participate in the

voting session yourself.

C CV D DV

You can also switch between the operating modes using the

web server (see

page 65).

9 8

C CV D DV

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 91 92

No comments

Sennheiser WiCOS User Manual Page 43