Sennheiser HSL-10 Instruction Manual download pdf (Page 8)

Adjusting the lifting height

 Press and hold down for two seconds both the “P2” button  and the “P1” button . The

LED  alternately flashes red and green.

 Release the buttons. The lifting pad raises to the currently adjusted height.

 Increase or decrease the lifting height by pressing the “P2”  (increase) or “P1” 

(decrease) button until you can hear the dial tone.

 Save the settings by pressing and holding down for two seconds both the “P2” button 

and the “P1” button .

Teaching the ring tones of your telephone to the HSL 10

You can teach two different ring tones to your HSL 10. This is required if

• your telephone supports two different ring tones, e.g. for external and internal calls,

• you hear a ring tone in your headset although not your telephone, but another telephone in

the vicinity is ringing,

• you can not hear a ring tone through your headset even your telephone is ringing.

Teaching ring tone 1:

 Set your telephone to ring tone 1. Make sure that ring tone 1 differs from the ring tones of

other telephones in the vicinity.

 Adjust the ring tone level to comfort.

 Press and hold the “P1” button  until the LED  flashes green.

 Let your phone ring. If recording has been successful, the LED  flashes red twice.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Sennheiser HSL-10 Instruction Manual Page 8