Sennheiser A 200 Instruction Manual download pdf (Page 10)

Putting the VMX 200 into operation

VMX 200 | 9

Putting the VMX 200 into operation

Charging the headset battery

Before using the headset for the first time, charge the rechargeable

battery for at least 2.5 hours. Later, 2 hours will suffice to fully charge the

battery. A fully charged battery provides a talk time of approx 6 hours.

1 Take off the headset and switch it off (see page 14).

2 Connect the smaller plug of the charging cable to the USB socket of the

VMX 200.

3 Connect the USB plug of the charging cable to the USB socket of the

power supply unit or your computer.

4 The battery is being charged and all active connections are interrupted.

The LED lights up red. When charging is complete, the LED flashes blue

once every 5 seconds.

WARNING

Danger of injury!

Wearing the headset when charging can cause burns and injuries.

왘 Do not wear the headset when charging.

2 h

When the battery level drops below 10 minutes of talk time, the LED

flashes red and you hear a low battery warning every 20 seconds.

The headset automatically switches off after the battery has

dropped below the minimum level.

1 2

3 4

3 s

100 %

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

No comments

Sennheiser A 200 Instruction Manual Page 10