Sennheiser 5200-II User Manual download pdf (Page 30)

If a problem occurs ...

If a problem occurs that is not listed in the above table or if the problem

cannot be solved with the proposed solutions, please contact your local

Sennheiser partner for assistance. To find a Sennheiser partner in your

country, search at www.sennheiser.com under “Service & Support”.

Problem Possible cause Possible solution

No operation

indication

Batteries are flat or

inserted incorrectly,

battery pack is flat

Replace the batteries or

check if they are inserted

correctly or recharge the

battery pack

Transmitter

cannot be

switched off/

Settings cannot

be changed

Lock mode is activated Deactivate the lock mode

(see “Deactivating the

autolock function

temporarily” on page 15)

Receiver:

No RF signal

Transmitter and receiver

are not on the same

channel

Set transmitter and

receiver to the same

channel

Transmitter is out of

range

Check the squelch

threshold setting

or reduce the distance

between receiving

antenna and transmitter

Weak signal Antenna signal is

attenuated

Do not clasp the antenna

section

Audio signal has

a high level of

background

noise

Transmitter’s input

attenuation is adjusted

too high

see “Adjusting the

microphone sensitivity –

“ATTEN”” on page 26

Receiver’s output level is

adjusted too low

Increase the line output

level

Audio signal is

distorted

Transmitter’s input

attenuation is adjusted

too low

see “Adjusting the

microphone sensitivity –

“ATTEN”” on page 26

Receiver’s output level is

adjusted too high

Reduce the line output

level

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37

Comments to this Manuals

No comments

Sennheiser 5200-II User Manual Page 30

Comments to this Manuals

Related products and manuals for Microphones Sennheiser 5200-II