Sennheiser 5200-II User Manual download pdf (Page 15)

Using the radio microphone

Doing a frequency check

The radio microphone has a frequency check mode that prevents that the

radio microphone transmits on an unwanted frequency after switch-on.

If the displayed frequency is the wanted frequency:

If you want to select another frequency, proceed as follows:

 Release the ON/OFF button .

 Within 5 seconds, change to the setting mode of the “CHAN” or

“TUNE” menu.

 Change the transmission frequency (see “Adjustment tips for the

operating menu” on page 23).

The automatic lock mode (autolock function)

The radio microphone has a lock mode that prevents that the radio

microphone is accidentally programmed while operating. When the

autolock function is activated via the “LOCK” menu (see page 27) the lock

mode is automatically activated 10 seconds after pressing the last button

and remains activated.

 When switching on the device, keep the

ON/OFF button  depressed.

The RF signal is deactivated. The current

frequency is displayed on the LC display

panel .

 Release the ON/OFF button .

After five seconds the “RF”  icon

appears and the radio microphone starts

transmitting.

Prior to this, the lock mode icon  flashes

several times on the display.

You can deactivate the autolock function either permanently (see

page 27) or temporarily (see page 15).







MHz

햴

MHz



1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 36 37

No comments

Sennheiser 5200-II User Manual Page 15