Sennheiser SKM 535 G2 Specifications download pdf (Page 12)

 Gently ease the capsule out of the contacts and then pull

it out of the housing as shown. Do not touch the

contacts and the diaphragm!

 Insert the new capsule.

 Secure the capsule by tightening the screw.

Note:

The screw mechanically secures the microphone capsule.

If the screw is missing, malfunctions may occur during

tough use.

 Put on the sound inlet bask et and identification ring

supplied with the new microphone head (NB: do NOT use

the old basket, as the different heads use slightly

differing internal foam) and screw it tight.

 Insert the batteries/accupack.

 Close the radiomicrophone and put it into operation.

Note:

Microphone capsule, sound inlet basket and foam insert

form an acoustic unit and must therefore always be

exchanged all together. Each microphone head comes

with a color-coded identification ring to distinguish

different microphone heads from each other (green =

MD 835, blue = MD 845, red = ME 865).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

No comments

Sennheiser SKM 535 G2 Specifications Page 12