Sennheiser EK 300 IEM User Manual download pdf (Page 7)

Product overview

Overview of the displays

After switch-on, the diversity receiver displays the “Frequency/Name”

standard display. For further illustrations and examples of the different

standard displays, refer to page 10.

The display backlighting is automatically reduced after approx. 20 seconds.

Display Meaning

햲 RF level “RF”

(Radio Frequency)

Diversity display:

Antenna input I is active

Antenna input II is active

RF signal level:

Field strength of the received signal

Squelch threshold level

햳 Audio level “AF”

(Audio Frequency)

Peak hold function

Modulation of the transmitter

(channel-separated when the

transmitter is set to stereo mode)

When the display shows full deflec-

tion, the audio input level is exces-

sively high.

햴 Frequency Current receiving frequency

(see page 17)

햵 Name Freely selectable name of the receiver

(see page 15)

햶 Lock mode icon Lock mode is activated (see page 10)

햷 Battery status Charge status:

approx. 100%

approx. 70%

approx. 30%

charge status is critical, the red

LOW BATT LED 쐏

is flashing

햸 Muting function

“MUTE”

“Mute” is only displayed on the “Frequency/

Name” standard display (see page 10)

• when the transmitter’s RF signal is

deactivated or

• when the transmitter is set to mono mode

and therefore does not transmit a pilot

tone but the receiver’s pilot tone evalua-

tion is activated.

or audio channels The audio channels are only displayed on the

“Frequency/Limiter” and “Frequency/High

Boost” standard displays (see page 10)

Stereo

Focus

햹 Pilot tone “P” Activated pilot tone evaluation

(see page 18)

MHz

823.925

ew300 IEM

AFRF

MUTE

쐏

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Comments to this Manuals

No comments

Sennheiser EK 300 IEM User Manual Page 7

Comments to this Manuals

Related products and manuals for Radio Stations Sennheiser EK 300 IEM