Sennheiser LV308 User Manual download pdf (Page 30)

SKM 100 G2 / SKM 300 G2 / SKM 500 G2 radiomicrophones



Remove the screw and put it to one side.

 Remove the microphone module by pulling it out of the housing

as shown. Do not touch the contacts!

 Insert the new module.

 Secure the capsule by tightening the screw.

Note:

The screw mechanically secures the microphone capsule. If the

screw is missing, malfunctions may occur during tough use.

 Put on the sound inlet basket and identification ring supplied

with the new microphone headand screw it tight.

 Insert the batteries/accupack.

 Close the radiomicrophone and put it into operation.

Note:

Microphone capsule, sound inlet basket and foam insert form an

acoustic unit and must therefore always be exchanged all

together. Each microphone head comes with a color-coded iden-

tification ring to distinguish different microphone heads from

each other (green = MD 835, blue = MD 845, red = ME 865).

Using the radiomicrophone

Switching the radiomicrophone on/off

The radiomicrophone can only be switched off when the standard

display is shown on the display panel. When in the operating menu,

briefly pressing the ON/OFF button will cancel your entry (ESC func-

tion) and return you to the standard display with the last stored

settings.

Note:

Remove the batteries or the rechargeable battery when the radi-

omicrophone will not be used for extended periods of time.

 Turn the protective cap  at the bottom of the radiomicrophone

so that the ON/OFF button  becomes accessible.

 Press the ON/OFF button to switch the radiomicrophone on. The

red LED  lights up.

 To switch the radiomicrophone off, press the ON/OFF button 

until “

OFF” appears on the display. The red LED  goes off.







1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

No comments

Sennheiser LV308 User Manual Page 30