Sennheiser SK 500 G2 User Manual download pdf (Page 20)

Adjustment tips for the

operating menu

Switching between channel banks –

BANK

Via the “BANK” menu, you can switch between the

transmitter’s nine channel banks. Each of the channel

banks “1” to “8” has up to 20 switchable channels that are

factory-preset to a transmission frequency (see “The

channel bank system” on page 36). The channel bank “U”

(user bank) has up to 20 switchable channels to store your

selection out of 1440 transmission frequencies that are

freely selectable within the preset frequency range.

When switching from one channel bank to another, the

channel with the lowest channel number is automatically

displayed.

Switching between the channels –

CHAN

Via the “CHAN” menu, you can switch between the different

channels in a channel bank. When switching between the

channels, please observe the following:

Always set the transmitter and the receiver of a

transmission link to the same channel.

Multi-channel operation

Combined with ew 500 G2 receivers, the transmitter can

form transmission links that can be used in multi-channel

systems. For multi-channel operation, only use the free

channels in a channel bank.

Before putting the transmission links into operation, we

recommend performing an auto scan (see operating

manual of the receiver).

Selecting the frequencies to be stored

in the channel bank “U” –

TUNE

Via the “TUNE” menu, you can select the frequencies to be

stored in the channel bank “U” (user bank).

When you have selected one of the channel banks “1” to “8”

and then select the “TUNE” menu, the transmitter auto-

matically switches to channel 01 of the channel bank “U”.

In this case, “U.01” briefly appears on the display.

ew500_SK.book Seite 52 Dienstag, 4. November 2003 4:02 16

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

No comments

Sennheiser SK 500 G2 User Manual Page 20