Sennheiser SDC 8200 SYS-M - 06-10 Specifications download pdf (Page 45)

Description:

The rackmount, 4-step sequential power panel with surge suppres-

sion and alarm interface is available with rocker or key-switch acti-

vation. The 1U steel chassis features a total of 9 outlets (6 switched,

3 unswitched) for sequential activation/deactivation of connected

equipment. Delay between sequenced steps can be adjusted (0.5-10

seconds) using a small screwdriver (not included) to avoid unin-

tended changes. ETL-listed in the U.S. and Canada to UL Standard

60065, panel has a power rating of 120V AC, 60Hz/20A with EMI/RFI

filtering. Includes 9-ft. cord with NEMA 5-20P plug.

Rear termination blocks accommodate remote switches, external trig-

gers and an alarm system interface for use where mandated by fire

code. Includes two dry contact closures (steps 5 and 6) for triggering

remote power control units (RPC-series units not included). Switches

can be overridden for life safety systems where fire code mandates

an alarm interface. Some models also include optional surge sup-

pression function that defeats surges up to 72,000A and is UL1449-

2 / ANSI C62.41-compliant.

Features:

• Total of 9 outlets: 6 switched (2-single on back, 2-duplex on

back); 3 unswitched (1-single on front, 2-single on back).

• Power Rating: 120VAC, 60Hz, 20A (each receptacle rated 15A)

• Actuation Switch: front panel rocker- or key-switch with mo-

mentary contacts (normally open SPST) plus rear barrier strip ter-

mination blocks for momentary (normally open) remote switches.

• Alarm Interface: lock on, lock off and switch lock functions for

alarm system or master control panel applications.

• External Control Connections: plug-in barrier strip terminal

blocks

• EMI/RFI Filter: 19dB@500kHz, 42dB@30MHz

• Dimensions: 19"W x 1.75"H (1U) x 9"D

• Made in the U.S.A.

Optional:

• Advanced Surge Suppression: some models include surge

suppression: UL1449-2 adjunct results: 1000 surges, 6000 volts,

3000A, C1 and B3 waveforms (IEEE C62.41), no failures.

– LEDs indicate status: if one section of the surge suppressor

has reduced protection, there are two additional sections avail-

able to safeguard equipment.

– Initial Clamping Voltage: 205V, UL rating 330V

– Endurance: IEEE C62.41-1991, B3 (C1), Pulses (lifetime):

1kv≥1,000,000; 3kv≥100,000; 6kv≥5000

– Transient Noise Reduction: 25dB@100kHz, 50dB@1MHz

– Response Time: less than 5 nanoseconds

– Applicable Standards: IEEE standard 587-80 A & B, IEEE

standard C62.41-1991, IEC 1000-4-5-1995 (IEC 801-5).

– Protection Mode: line to neutral, zero ground leakage.

Models: ACR-SCS4-2009-RT2, ACR-SCS4-2009K-RT2, ACSPR-SCS4-2009-RT2, ACR-2009-SPSQK

19" EIA Rackmount Panels – 20A Corded

Fax—636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to

change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)

Spec. No. 1095

(rev. 12.05.12)

pg. 1 of 2

Model No. Formerly Description

ACR-SCS4-2009-RT2 --- 20A – AC Rackmount Panel (1U) with sequencing, remote control, rocker-switch

ACR-SCS4-2009K-RT2 --- 20A – AC Rackmount Panel (1U) with sequencing, remote control, key-switch

ACSPR-SCS4-2009-RT2 --- 20A – AC Rackmount Panel (1U) with sequencing, remote control, advanced surge suppression, rocker-switch

ACR-2009-SPSQK ACSPR-SCS4-2009K-RT2 20A – AC Rackmount Panel (1U) with sequencing, remote control, advanced surge suppression, key-switch

A & E Specifications:

The sequential AC rackmount power panel shall be Lowell Model

___________________. It shall be ETL-listed and have a power rat-

ing of 120VAC, 60Hz/20A with EMI/RFI filtering and a total of 9 out-

lets (6 switched, 3 unswitched) and 2 steps providing contact closures

to sequentially activate/deactivate equipment (4-6 steps) with a se-

quence delay of 0.5 to 10 seconds. It shall be housed in a 1U rack-

mount chassis with color-coded LEDs. Front activation shall be via a

_________ (rocker or key) switch.

(OPTIONAL: It shall provide surge protection.)

The 19" EIA rackmount power panel is available with a

key switch or rocker switch (shown). This model also in-

cludes the optional surge suppression function.

Panel includes 9-ft. cord with NEMA

5-20 plug.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 87 88

Comments to this Manuals

No comments

Sennheiser SDC 8200 SYS-M - 06-10 Specifications Page 45

Comments to this Manuals

Related products and manuals for Software Sennheiser SDC 8200 SYS-M - 06-10