Sennheiser SK 500 G2 - 02-06 Specifications download pdf (Page 19)

Adjustment tips for the operating menu

Switching between channel banks

Bank

Via the “Bank” menu, you can switch between the receiver’s nine channel

banks. The channel banks “1” to “8” have up to 20 switchable channels that

are factory-preset to a receiving frequency (see “The channel bank system”

on page 4). The channel bank “U” (user bank) has up to 20 switchable

channels to store your selection out of 1440 receiving frequencies that are

freely selectable within the preset frequency range.

When switching from one channel bank to another, the channel with the

lowest channel number is automatically displayed. If, during the last scan of

this channel bank, an interfering frequency was detected on the channel with

the lowest channel number, the receiver display panel automatically displays

the next free channel.

Switching between the channels in a channel bank

Channel

Via the “Channel” menu, you can switch between the different channels in a

channel bank. When switching between the channels, please observe the

following:

y Always set the transmitter and the receiver of a transmission link to the

same channel.

y After scanning the channel banks (see “Scanning the channel banks for

free channels” on page 19), only the free channels can be chosen on the

receiver. Set the transmitter and the receiver to one of the free channels.

Selecting the frequencies to be stored

in the channel bank “U”

Tune

Via the “Tune” menu, you can select the frequencies to be stored in the

channel bank “U” (user bank).

When you have selected one of the channel banks “1” to “8” and then select

the “Tune” menu, the receiver automatically switches to channel 01 of the

channel bank “U”. In this case, “U.01” briefly appears on the display.

 Use the / rocker button to select the desired receiving frequency.

Receiving frequencies are tunable in 25-kHz steps within a switching

bandwidth of 36 MHz max. For intermodulation-free frequencies, please

refer to the enclosed frequency table.

Scanning the channel banks for free channels

Scan

Before putting one or several ew 500 G2 transmission links into operation,

you should scan the channel banks for free channels.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Sennheiser SK 500 G2 - 02-06 Specifications Page 19