Sennheiser HD400 User Manual download pdf (Page 21)

Working with Presets

3•3

For either POD HD300 or HD400, using these Bank switches will “queue” the selected

Bank - no new Preset is loaded until you press the desired A, B, C or D Channel switch.

Saving Presets

To save your current tone as a Preset, press the SAVE button and you’ll see it start ﬂashing

red, then use the following functions.

Rotate knob to edit

selected text character.

Press to select next

character group

Press SAVE button to

initiate and complete

Preset Save

Left/Right selects one of

the 14 text characters

- the selected character

ﬂashes

Up/Down selects the

next/previous location

as the destination

• The top row of the LCD screen shows the Preset’s current location, followed by the

destination Channel location where the Preset will be saved. In the above example,

our current 06A Preset is set to be saved in location 01B.

• To save your Preset to a new location, use the Nav. Disc buttons to choose the

new Channel location. You’ll also see the amber LED display ﬂashing, indicating the

destination Channel location.

• If you want to overwrite the Preset within the current location, simply keep the

Channel location the same.

• Use the Nav. Disc buttons to select each character of the Preset name displayed

in the lower row of the LCD screen. Turn the PRESETS knob to change the selected

character to enter your own custom Preset name.

• Press the ﬂashing SAVE button once again to perform the save. Or, if you change

your mind about saving, press the TAP switch instead of the SAVE button to abort

the process.

Be sure to also check out the free Line 6 POD HD300/HD400 Edit software. It can be

used to create, customize & manage an unlimited library of Presets right on your Mac® or

Windows® computer! See “POD HD Edit Software” on page 2•7.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 80 81

No comments

Sennheiser HD400 User Manual Page 21