Sennheiser EW 335 G3 Instruction Manual download pdf (Page 22)

Using the devices

SKM 300 radio microphone

To switch the radio microphone on (online operation):

To switch the radio microphone off:

 If necessary, deactivate the lock mode (see page 21).

To switch the radio microphone on and to deactivate the RF signal on switch-on (offline

operation):

 Briefly press the ON/OFF button .

The radio microphone transmits an RF signal. The transmission icon  is

displayed.

The red ON LED  lights up and the standard display “Frequency/Name”

appears on the display panel. The MIC button 쐋 lights up red.

You can switch the radio microphone on and deactivate the RF signal on switch-on.

For more information, see below.

 Press the ON/OFF button  until “OFF” appears on the display panel. The red

ON LED  goes off. The MIC button 쐋 goes off. The display panel turns off.

When in the operating menu, pressing the ON/OFF button  cancel your entry (ESC

function) and return you to the current standard display.

 Press the ON/OFF button  until “RF Mute On?” appears on the display panel.

 Press the multi-function switch .

The transmission frequency is displayed but the radio microphone does not

transmit an RF signal. The transmission icon  is not displayed and the MIC

button does not light up. When the pilot tone function is activated on both radio

microphone and receiver, “RF Mute” appears on the receiver’s display panel.

Use this function to save battery power or to prepare a radio microphone for use

during live operation without causing interference to existing transmission links.





쐋

ON/OFF

MHz

543.200

ew300 G3

MUTE



1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

No comments

Sennheiser EW 335 G3 Instruction Manual Page 22