Sennheiser EW 335 G3 Instruction Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 42
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
Cleaning the devices
29
Cleaning the devices
EM 300
Before cleaning, disconnect the device from the mains.
Use a slightly damp cloth to clean the receiver from time to time. Do not use any solvents
or cleansing agents.
SK 300
Use a slightly damp cloth to clean the bodypack transmitter from time to time. Do not
use any solvents or cleansing agents.
SKM 300
Use a slightly damp cloth to clean the radio microphone from time to time. Do not use any
solvents or cleansing agents.
To clean the radio microphone’s sound inlet basket (MMD 835-1, MMD 845-1, MMD 935-1,
MMD 945-1, MME 865-1):
Unscrew the upper sound inlet basket from the microphone head by turning it counter-
clockwise.
Remove the foam insert.
There are two ways to clean the sound inlet basket:
Use a slightly damp cloth to clean the upper sound inlet basket from the inside and
outside
or scrub with a brush and rinse with clear water.
If necessary, clean the foam insert with a mild detergent or replace the foam insert.
Dry the upper sound inlet basket.
Dry the foam insert.
Reinsert the foam insert.
Replace the sound inlet basket on the microphone head and screw it tight.
You should also clean the contact rings of the microphone head from time to time:
Wipe the contact rings of the microphone head with a dry cloth.
CAUTION! Liquids can damage the electronics of the devices!
Liquids entering the housing of the devices can cause a short-circuit and damage the
electronics.
Keep all liquids away from the devices.
CAUTION! Liquids can damage the microphone head!
Liquids can damage the microphone head.
Only clean the upper sound inlet basket.
For information on cleaning the MMK 965-1 microphone head, refer to its instruction
manual.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

Comments to this Manuals

No comments