Sennheiser EW 335 G3 Instruction Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 42
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
Using the devices
21
To activate the RF signal:
Synchronizing a transmitter with the receiver
You can synchronize a suitable transmitter of the ew 300 G3 series with the receiver. During
synchronization, the following parameters are transferred to the transmitter:
To transfer the parameters:
Switch the transmitter and the receiver on.
Press the button on the receiver.
Sync” appears on the display panel of the receiver.
Place the infra-red interface of the transmitter (see page 8 and page 10) in front of the
infra-red interface of the receiver .
The parameters are transferred to the transmitter. When the transfer is completed, “
appears on the display panel. The receiver then switches back to the current standard
display.
To cancel the transfer:
Press the STANDBY button on the receiver.
” appears on the display panel of the receiver. “ ” also appears if:
no transmitter was found or the transmitter is not compatible,
no transmitter was found and the synchronization process was canceled after 30
seconds,
you canceled the transfer.
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item
(see page 25). If the lock mode is activated, you have to temporarily deactivate it In order to
be able to operate the devices:
EM 300
Briefly press the ON/OFF button .
RF Mute Off” appears on the display panel.
Press the multi-function switch .
The transmission icon is displayed again.
ON/OFF
Setting Transferred parameters
Frequency Preset Currently set frequency
Name Freely selectable name currently set on the receiver
Pilot Tone Current pilot tone setting of the receiver (“Inactive”/“Active”)
Via the “Sync Settings” submenu, you can adjust the parameters to be transferred
to the transmitters (see page 27).
Turn the jog dial.
Unlock?” appears on the display panel.
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Comments to this Manuals

No comments