Sennheiser Tourguide Wireless Transmitter SR 2020 D User Manual download pdf (Page 15)

Putting the SR 2020 D into operation

Connecting an external audio source to the transmitter

 Connect the line output of the external audio source to the

XLR-3F socket  of the transmitter.

Connecting a condenser microphone

The microphone input of the SR 2020 D transmitter is

exclusively designed for use with condenser microphones.

Suitable microphones are listed on page 6.

 Connect the condenser microphone to the XLR-3F socket 

of the transmitter.

Connecting the headphones

The Mic/Line level display  displays the strength of the input

signal (see page 8). The SR 2020 D transmitter also features a

headphone output for monitoring purposes.

To monitor the audio signal via headphones:

 Set the headphone volume control  to the lowest volume

by turning it to the left as far as possible.

 Connect headphones with a ¼” (6.3 mm) stereo jack plug to

the headphone output .

 Put the headphones on.

 Gradually turn up the volume.





Danger of hearing damage!

Listening at high volume levels for long periods can

lead to permanent hearing defects.

 Use the headphone volume control (VOL)  to

set the volume for the connected headphones to

the minimum before putting the headphones on.

CAUTION!





1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Sennheiser Tourguide Wireless Transmitter SR 2020 D User Manual Page 15