Sennheiser Tourguide Wireless Transmitter SR 2020 D User Manual download pdf (Page 19)

Operating the SR 2020 D

Setting a channel (“Channel”)

To set a certain channel, proceed as follows:

1. Make sure that the transmitter and the receivers are set to

the same channel mode (“Tourguide” or “Conference”),

otherwise no connection can be established (see page 18).

2. Set the SR 2020 D transmitter to the desired channel (see

next section).

3. Set one of the receivers to the same channel.

4. Automatically set all other receivers to the same channel

using the channel copy function (for information on the

channel copy function, please refer to the instruction manual

of the Tourguide 2020 system).

To set the transmitter to the desired channel:

 Select the “Channel” menu.

“Channel” appears on the display and the current channel is

shown.

 Press the / rocker button  to change the channel.

 Press the SET button  to store the selected channel.

Transmitting several

languages simultaneously

In order to be able to transmit several languages

simultaneously, you require one SR 2020 D transmitter and one

or several receivers per language:

 Set the transmitter and the receivers assigned to certain

language to the same channel.

 Do not use this channel for any other language.

Displaying the frequency of the selected channel

(“Frequency”)

You can display the frequency of the selected channel. This

function is useful, if you are using other Tourguide systems in

the vicinity which interfere with your transmission (see previous

section).

 

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Sennheiser Tourguide Wireless Transmitter SR 2020 D User Manual Page 19