Sennheiser Pro1/Pro2 User Manual download pdf (Page 18)

Putting the headset system into operation

왘 Push the AUDIO button  in the direction in which you want to

increase the volume until the HEADSET LED  goes off.

The headset switches to standby mode.

Left

Right

5 s

Testing the headset system in Phone mode and

adjusting it

Testing the telephone connection

When PC mode is selected (the LED of the PC button

 lights up white):

왘 Press the PHONE button

쐋 on the base station.

The base station is set to Phone mod

e and the LED of the PHONE

button

쐋 lights up white.

왘 Press either the LINK button  on the headset or the PHONE button

쐋 on the base station.

A wireless link is established between the headset and

the base

station, the LINK LED  lights up blue and the HEADSET LED  flashes

blue.





왘 Lift the handset (If a handset lifter is connected, it automatically lifts

the handset).

The system is correctly connected if you

can hear a clear dial tone and

if the other party can hear you at a comfortable level.

If the audio signal/dial tone is disturbed, adjust the audio signal (see

page

18). If the other party cannot hear you well, adjust the micro-

phone sensitivity (see page 18).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

No comments

Sennheiser Pro1/Pro2 User Manual Page 18