Sennheiser Pro1/Pro2 User Manual download pdf (Page 21)

Putting the headset system into operation

Adjusting advanced settings

The DIP switch row  allows you to adjust the headset system to your

individual needs. By default, all DIP switches are set to the upper position.

To change the settings of the DIP switch row :

왘 If necessary, disconnect an existing wireles

s link between base station

and headset (see page 23).



왘 Use a pointed object (e.g. a pen) to set the DIP switches to the desired

position.

Configuring the handset lifter/hook swit

ch – DIP switch 1 and 2

Switch position Function

Manual operation

Lifts/hangs up the handset manually or using

the

handset lifter.

Electronic hook switch (DHSG standard)

Call control via the DW Pro1/Pro2

headset system.

Electronic hook switch (MSH standard)

Call control via the DW Pro1/Pro2 headset system.

Manual operation

Lifts/hangs up the handset manually or using

the handset lifter.

Adjusting the radio range – DIP switch 3

If many DECT systems are operated in a confined space

, interference can

occur. In this case, you should change the radio range.

Switch position Function

Standard radio range

Reduced radio range

Use this setting in order to avoid interference with other

DECT systems.

Range of approx. 10 m indoors

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

No comments

Sennheiser Pro1/Pro2 User Manual Page 21