Sennheiser 5200-II User Manual download pdf (Page 16)

Using the radio microphone

Deactivating the autolock function temporarily

To be able to make changes to the settings via the operating menu, you

must temporarily deactivate the lock mode.

After you have exited the operating menu, the lock mode is automatically

re-activated after 10 seconds. You can also immediately activate the lock

mode by pressing the ON/OFF button  briefly.

Identifying the radio microphone

The radio microphone comes with nine interchangeable color-coded

identification markers, allowing you to clearly identify each radio

microphone.

 To achieve this, either press the ON/OFF

button  or the multi-function switch 

(switch position  SET).

“LOCK” appears on the display panel.

 Slide the multi-function switch  to the

position  (UP) or  (DOWN).

“UNLOCK” appears on the display panel.

 Press the multi-function switch  (

switch

position

 SET).

You can now change the settings.

 To remove the identification marker, press

the two snap-in pins together while

sliding the identification marker out of the

guide rails.

 Put on the new identification marker by

sliding it onto the guide rails.





SET

DOWN



1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

No comments

Sennheiser 5200-II User Manual Page 16