Sennheiser SK 50 - 04-05 Specifications download pdf (Page 23)

Preparing for use

Cascading several chargers

 Make sure that the charger is disconnected from the mains.

 Unscrew the two screws  at the right bottom side of the

charger.

 Slide the two rails  out of the guiding slots and screw them

tight using the two screws .

 Unscrew the two screws  at the left bottom side of the second

charger.

 Slide the second charger onto the rails of the first charger and

screw the rails tight using the two screws .

 Up to three chargers can be cascaded together with the rails and

can by powered by a common mains unit..

Setting up the charger

The charger has four plastic feet to ensure that it cannot slip on the

surface on which it is placed.

Attention!

Some furniture surfaces have been treated with varnish, polish

or synthetics which might cause stains when they come into

contact with other synthetics. Despite a thorough testing of the

synthetics used by us, we cannot rule out the possibility of

staining.

Switching the charger on or off

 To switch the charger on, insert the hollow jack plug on the cable

of the mains unit (mains unit must be ordered separately) into

socket .

 Connect the mains unit to the mains.

All LEDs briefly light up one after the other.







Numbers of chargers Mains unit requiredl

1 NT 1

up to 3 NT 3



1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 61 62

No comments

Sennheiser SK 50 - 04-05 Specifications Page 23