Sennheiser SLT23460FC User Manual download pdf (Page 8)

8 MKH 418 S

English

powered simultaneously, even if only the signal of one

channel is required. If no 48 V phantom powering is

available at the microphone input of the subsequent

device, suitable power supply units must be

interconnected, e.g. two MZA 14 P48 battery power

supply units or one Neumann N 48 i-2 mains power

supply unit (both units are fitted with a 3-pin XLR

connector) or one Neumann BS 48 i-2 battery power

supply unit (fitted with a 5-pin XLR connector). The

MZA 14 P48 battery power supply unit also allows

direct connection to unbalanced inputs.

Also suitable is the MZA MS-1 (available from

Sennheiser UK). This is a battery power supply, with

5-pin XLR input and output, that incorporates an

MS matrix amplifier and microphone pre-amplifier. The

unit enables an MS microphone to output left/right

stereo and incorporates a ch-2 phase-reverse switch,

bass roll-off and adjustable level and width controls.

Output level is switchable microphone or line.

The MKH 418 S is connected via a 5-pin XLR cable.

The connector of the MKH 418 S has standard pin

assignment:

Pin 1 = Casing/ground

Pin 2 = M channel (+)

Pin 3 = M channel (-)

Pin 4 = S channel (+)

Pin 5 = S channel (-)

Accessories

The following accessories are available:

• MZS 20-1 Suspension/pistol grip

• MZT 100 Table stand

• MZT 441 Table stand

• MZH 60-1 “Hairy” cover

• MZW 60-1 Basket windshield

• MZW 415 Foam windshield

• Y-Cable AC 20 XLR-5F / 2 x XLR-3M, 1 m length

Please order from your local Sennheiser dealer.

Notes on MS Stereo Sound Recording

The MS signal format of the MKH 418 S provides a

particularly easy means of setting the optimum

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

No comments

Sennheiser SLT23460FC User Manual Page 8