Sennheiser EMP 2015 Instruction Manual download pdf (Page 27)

Ch no

3. Assign a channel number

You now have to assign the frequency memory a channel number (from 0 to

255). If you use several Soundfield Systems in neighboring rooms, you can

assign channel numbers 1 – 16 to one group of transmitters and receivers

and channel numbers 17 – 32 to the next group, etc. The 16 fixed frequency

memories are factory-preset to channel numbers 01 – 16.

씰 Press the SET button four times to select the “Ch no” menu. “Ch no”

appears on the display; after a short pause the currently assigned channel

number is indicated.

씰 With the / buttons you can now select a different channel number.

The new channel number starts flashing on the display and becomes

effective immediately.

Note:

Channel numbers which have already been assigned to a fixed

frequency memory are skipped!

씰 Press the SET button to return to the top menu level. The display then

switches back to the standard display.

Note:

Use the same channel number for both transmission and receiving

frequency!

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

No comments

Sennheiser EMP 2015 Instruction Manual Page 27