Sennheiser EK 2000 IEM User Manual download pdf (Page 25)

Adjusting settings via the operating menu

Activating/deactivating the automatic lock mode – “Auto Lock”

The lock mode prevents that the balance is accidentally adjusted when the

receiver is in Focus mode. In addition, the lock mode prevents that the

diversity receiver is accidentally switched off or programed during opera-

tion. The lock mode icon 햶 on the current standard display indicates

that the lock mode is activated. For information on how to use the lock

mode, refer to page 14.

The extended menu “Advanced Menu”

To get into the extended menu “Advanced Menu”:

왘 From the main menu, select “Advanced”.

Setting the receiving frequencies and the frequency banks “U1”

to “U6 – “Tune”

Via the “Tune” menu item, you can set a receiving frequency to be stored

in the current channel or you can select a different channel in one of the

frequency banks “U1” to “U6” and assign this channel a receiving

frequency.

Setting a receiving frequency for the current channel

When you have selected one of the system banks and then select

the “Tune” menu, the diversity receiver automatically switches to

channel 1 of the frequency bank “U1”. In this case, “U1.1” briefly

appears on the display panel.

Upon delivery, the channels of the frequency banks “U1” to “U6”

are not assigned a receiving frequency.

왘 Press the rocker button until the “Tune” menu item appears.

왘 Press the SET button.

The MHz section of the receiving frequency of the channel is

highlighted.

Active

Auto Lock

Active

Auto Lock

Inactive

Auto Lock

“Stored”

SET

Call up “Auto

Lock”

Select the desired

setting

Store the setting

SET

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 40 41

No comments

Sennheiser EK 2000 IEM User Manual Page 25