Sennheiser EK 2000 IEM User Manual download pdf (Page 33)

32

If a problem occurs ...

If a problem occurs ...

Problem Possible cause Possible solution

Diversity

receiver cannot

be operated,

“Locked”

appears on the

display panel

Lock mode is activated Deactivate the lock mode

(see page 14).

No operation

indication

Batteries are flat or

accupack is flat

Replace the batteries or

recharge the accupack

(see page 10).

No RF signal Transmitter and

receiver are not

on the same channel

Set the transmitter and

receiver to the same channel.

Synchronize the transmitter

with the receiver

(see page 28).

Transmission range

is exceeded

Check the squelch threshold

setting (see page 20).

Reduce the distance between

transmitter and receiver.

RF signal is deactivated

(“RF Mute“)

Activate the RF signal

(see the instruction manual

of the transmitter).

RF signal avail-

able, no audio

signal, “MUTE”

appears on the

display panel

Transmitter is muted Cancel the muting

(see the instruction manual

of the transmitter).

Receiver’s squelch

threshold is adjusted

too high

Reduce the squelch threshold

setting (see page 20).

Transmitter is set to

mono operation and

therefore doesn’t

transmit a pilot tone

Deactivate the pilot tone

evaluation (see page 26).

Transmitter is set to

stereo operation and

therefore transmits a

pilot tone

Activate the pilot tone

evaluation (see page 26).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Comments to this Manuals

No comments