Sennheiser Electric Heater SZI 1029-10 User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 59
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
28
29
INFRA-RED TECHNOLOGY The SZI 1029 is a high power infra-red radiator. In a cordless infra-red
sound transmission system it transforms the electrical signal delivered
by an infra-red modulator or by an audio source into invisible infra-red
light and radiates this IR light into a room. In contrast to radio
transmission infra-red transmission is limited to the room, thus other
systems can be operated in neighbouring rooms without interference.
The high-power radiator SZI 1029 is switched on by the IR carrier
signal that is produced by the modulator. Commercially available
50 coaxial cables with BNC connectors are used for feeding
sig nals from the modulator to the SZI 1029 radiator.
The infra-red radiator diodes in the high power radiator respond to the
received signals and radiate modulated infra-red light. Depending on
the model the radiator delivers a radiating power of 5 or 10 W
(see
AVAILABLE MODELS).
WIDEBAND Infra-red wideband transmission systems are chiefly used for transmitting
audio signals in hi-fi quality.
The two available wideband channels (2.3 MHz and 2.8 MHz) are
internationally standardized and are either used for two mono channels
or for stereo transmission.
NARROW-BAND Infra-red narrow-band transmission systems allow the transmission of
up to 32 mono channels with a slightly reduced audio frequency response.
They are ideal for multi-channel interpretation systems and multilingual
information systems.
AREAS OF APPLICATION
Conference and simultaneous interpretation systems
High quality cordless sound transmission in recording studios
or for hi-fi systems
IMPACT OF CURTAINS,
Dark and heavy materials, curtains, carpets, panellings, and wall
CARPETS, AND PAINTS coverings tend to absorb the light, a good reception can only be
achieved in direct line of sight of the infra-red radiator.
Roughcast and strongly structured wallpapers (such as woodchip,
embossed or fabric papers) reflect the light unevenly but allow a
more uniform propagation of the infra-red signal.
Smooth and bright walls, smooth tiled floors and windows are
highly reflective and are thus favourable for the propagation of in
fra-red light.
Different wall paints may reflect infra-red light differently although
they have the same colour. This is due to the type and thecomposit-
ion of the paint pigmentation.
The power which is necessary to irradiate a room varies accordingly.
IR-Licht
Reflexion
IR-Licht
Reflexion
IR-Licht
Reflexion
IR light IR light
IR light
Reflection Reflection Reflection
PROPAGATION OF The propagation of the infra-red signal radiated by the SZI 1029 can be
INFRA-RED LIGHt compared to the propagation of normal daylight or artifical (lamp) light.
Thus it is subject to similar conditions when it falls onto different
materials:
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

Comments to this Manuals

No comments