Sennheiser W300 IEM User Manual download pdf (Page 13)

Preparing the devices for use

SR 300 IEM G2 transmitter/

SR 350 IEM G2 twin transmitter

Fitting the device feet

To ensure that the transmitter cannot slip on the surface on which it is placed,

four self-adhesive soft rubber feet are supplied.

Note:

Do not fit the rubber feet when rack mounting the transmitter.

 Ensure that the base of the transmitter is clean and free from grease

before mounting the rubber feet.

 Fix the rubber feet to the base of the transmitter by peeling off the safety

paper and fitting them as shown in the digram on the left.

Rack mounting

CAUTION! Risk of staining of furniture surfaces!

Some furniture surfaces have been treated with varnish, polish

or synthetics which might cause stains when they come into

contact with other synthetics. Despite a thorough testing of the

synthetics used by us, we cannot rule out the possibility of

staining.

 Do not place the transmitter on delicate surfaces.

CAUTION! Risks when rack mounting the transmitter!

When installing the device in a closed or multi-rack assembly,

please consider that, during operation, the ambient

temperature within the rack may significantly rise above room

temperature.

 The ambient temperature within the rack must not exceed

the temperature limit specified in the specifications.

 When installing the device in a rack, take good care not to

affect the ventilation required for safe operation or provide

additional ventilation.

 Make sure the mechanical loading of the rack is even to

avoid a hazardous condition such as a severely unbalanced

rack.

 When connecting the device to the power supply, observe

the information indicated on the type plate. Avoid circuit

overloading. If necessary, provide overcurrent protection.

 Ensure a reliable mains ground connection of the device by

taking appropriate measures.

 When installing the device in a closed or multi-rack

assembly, please note that intrinsically harmless leakage

currents of the individual devices may accumulate, thereby

exceeding the allowable limit value. As a remedy, ground the

rack via an additional ground connection.

ew300_350_IEM_INT.book Seite 11 Freitag, 7. März 2008 8:55 08

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 45 46

Comments to this Manuals

No comments

Sennheiser W300 IEM User Manual Page 13

Comments to this Manuals