Sennheiser W300 IEM User Manual download pdf (Page 34)

Entering names

NAME

Name

Via the “Name” menu, you can enter a freely selectable name for the

transmitter and the receiver. You can, for example, enter the name of the

performer for whom the adjustments have been made.

The name can be displayed on the standard display and can consist of up to

ten characters (transmitter) and up to six characters (receiver) such as:

y letters (without pronounciation marks),

y numbers from 0 to 9,

y special characters e.g. () - . _ and spaces.

To enter a name, proceed as follows:

 Press the SET button to get into the setting mode of the “Name” menu.

The first segment starts flashing on the display.

 With the / rocker button you can now select a character. By briefly

pressing a button, the display jumps either forwards or backwards to the

next character. If you hold down a button, the display starts cycling

continuously.

 Press the SET button to change to the next segment and select the next

character.

 Have you entered the name completely? Press the SET button to store

your setting and to return to the previous menu level.

Loading the factory-preset default settings

RESET

Reset

Via the “Reset” menu, you can load the factory-preset default settings. With

the receiver, however, the selected setting for the pilot tone remains

unchanged. After the reset, the device is restarted and the standard display

is shown on the display panel.

Activating/deactivating the pilot tone evaluation

(receiver only)

PILOT

Pilot

Via the “Pilot” menu, you can activate or deactivate the pilot tone evaluation

of the receiver.

The pilot tone is used to

y code the transmitter’s stereo signal,

y support the squelch function (Squelch).

During stereo operation, the transmitter adds the pilot tone to the

transmitted stereo signal and the receiver detects and evaluates the pilot

tone. When the transmitter is set to mono operation, deactivate the pilot

tone evaluation on the receiver.

You can combine units of first and second generation ew 300 IEM systems

without any problems.

Adjusting the contrast of the graphic display (transmitter

only)

LCD-Contr

Via the “LCD Contr” menu, you can adjust the contrast of the graphic display

in 16 steps.

ew300_350_IEM_INT.book Seite 32 Freitag, 7. März 2008 8:55 08

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 45 46

Comments to this Manuals

No comments

Sennheiser W300 IEM User Manual Page 34

Comments to this Manuals