Sennheiser W300 IEM User Manual download pdf (Page 15)

When mounting only one transmitter into a rack, use the blanking plate 

instead of the second transmitter.

To mount only one transmitter into a rack:

 Hook the two rack mount “ears”  to the front panel of the transmitter.

 Secure the rack mount “ears” to the transmitter using two of the supplied

recessed head screws (M 3x6) respectively.

 Secure the blanking plate  to one of the rack mount “ears”  using two

of the supplied recessed head screws (M 6x10).

 If you are not front mounting the BNC output connector, insert the two

blanking plugs  into the holes of the blanking plate.

 Slide the transmitter into the 19” rack.

 Secure the rack mount “ears” to the rack.

Connecting the antenna

Connecting the antenna to the rear

of the transmitter

The supplied telescopic antenna can be mounted quickly and easily and are

suitable for all applications where – good transmission conditions provided –

a wireless transmission system is to be used without a large amount of

installation work.

 Connect the telescopic antenna to the BNC socket  at the rear of the

transmitter.

 Pull the end cap to extend the telescopic antenna .

Use a remote antenna (available as an accessory) when the transmitter

position is not the best antenna position for optimum transmission.

Antenna front mounting When mounting only one SR 300 IEM G2 transmitter or one SR 350 IEM G2

twin transmitter into a rack, you can use an antenna mount (optional

accessory) to mount the transmitter’s antenna connection to the front of the

rack.

Use the antenna mount matching the respective transmitter:

y For the SR 300 IEM G2 transmitter: AM 2 antenna mount

y For the SR 350 IEM G2 twin transmitter: GA 3030 AM antenna mount









ew300_350_IEM_INT.book Seite 13 Freitag, 7. März 2008 8:55 08

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 45 46

No comments

Sennheiser W300 IEM User Manual Page 15