Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual download pdf (Page 114)

Appendix C: Repeater for the SDC 8000 system

114

Appendix C: Repeater for the SDC 8000

system

A repeater is used to boost the signal on a system cable. When a system

cable reaches a length of 100 m, the signal over the system cables

becomes too weak.

You can insert a repeater into the system cable to boost this signal.

The repeater features an IN and an OUT socket. The cable from the central

unit should be connected to the IN socket  and the following daisy-chain

of conference consoles should be connected to the OUT socket .

It is also possible to connect a cable daisy-chain with conference consoles

to the central unit and – when the cable daisy-chain reaches 100 m – insert

a repeater into the daisy-chain.

The DC power supply which reaches the repeater is 30 to 60 VDC straight

from the central unit.

The repeater features three LEDs:

 UPLINK FAIL LED: lights up when there is no communication with a

conference console (normally OFF).

 DOWNLINK FAIL LED: lights up when there is no communication from

the central unit (normally OFF).

 POWER SUPPLY LED: lights up when power is supplied to the repeater

(normally ON).











1 2 ... 109 110 111 112 113 114 115 116

No comments

Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual Page 114