Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual download pdf (Page 90)

Configuring the SDC 8000 system

Half-automatically initializing all interpreter consoles on the central unit

Once you have configured the number of interpreter booth (see “Setting

the max. number of interpreter booths/languages” on page 86) and the

number of interpreter consoles per booth (see “Setting the max. number

of interpreter consoles per booth” on page 86), you have to initialize all

interpreter consoles on the central unit as follows:

왘 From the central unit’s operating menu, choose “

Interpretation”,

“

Initialize Units” and “Full Init” one after the other.

The red signal light rings on all interpreter consoles start flashing and

the displays of the interpreter consoles show “

01” for both the booth

and the desk number.

1. If all of the interpreter consoles which were configured via the central

unit are connected, you can half-automatically initialize the

interpreter consoles, i.e. by pressing the MICRO key of an interpreter

console, this console is intialized on the central unit with the booth

and desk number shown on the console’s display.

왘 Start initializing the interpreter consoles by pressing the MICRO key of

interpreter console 1 in booth 1.

The red signal light ring of the interpreter console stops flashing. The

booth and desk numbers of all subsequent interpreter consoles are

automatically increased according to the preset number of booths and

the preset number of interpreter consoles per booth.

왘 Continue by pressing the MICRO key of interpreter console 2 in booth 1,

and so on.

왘 If all booth and desk numbers are assigned correctly, press the ENTER

key on the central unit to save this configuration.

The displays of the interpreter consoles show the languages assigned

to the A-channel and the B-channel and other related information (see

example illustration on the left).

The interpreter consoles are now ready for operation.

2. Alternatively, you can assign the booth and desk number of an

interpreter console individually (see “Manually assigning an

interpreter console an individual booth number” on page 90 and

“Manually assigning an interpreter console an individual desk number

(interpreter console number)” on page 91).

Manually assigning an interpreter console an individual booth number

To manually assign an interpreter console an individual booth number

(

BOOTH):

왘 From the central unit’s operating menu, choose “

Interpretation”,

“

Initialize Units” and “Full Init” one after the other.

Initialize Units

1 Full Init

Press Mic to confirm

BOOTH DESK

01 01

Full Init

Press ENTER to save

01 ENG

02 ARA

00 00 00 00

FLO FLO FLO FLO

Initialize Units

1 Full Init

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 115 116

Comments to this Manuals

No comments

Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual Page 90

Comments to this Manuals

Related products and manuals for Microphones Sennheiser CONFERENCE SYSTEM SDC 8000