Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual download pdf (Page 76)

Configuring the SDC 8000 system

Setting the volume of the consoles’ built-in loudspeakers

The bars on the start display indicate the current volume setting for the

consoles’ built-in loudspeakers.

To set the volume of the consoles’ built-in loudspeakers:

왘 Turn the jog wheel  on the central unit.

If you turn the jog wheel clockwise, the volume of the consoles’ built-in

loudspeakers is increased, if you turn the jog wheel counter-clockwise,

the volume is reduced.

Configuring the conference system

Turning on the central unit for the first time

When turning on the central unit for the first time, the text “

Init

Refused

” is shown on the displays of the conference consoles connected

to the central unit. The conference consoles cannot be detected by the

central unit, since they have not yet been assigned a microphone number.

Your conference system is not yet operational.

왘 First, initialize the conference consoles in order to assign each console

an internal microphone number. You can choose between two

initialization modes: automatic and manual initialization.

Note!

Once you have configured your conference and interpretation system,

the configuration will be retained in memory on turn-off. When turning

on the central unit again, your conference system is immediately

operational.

Automatically initializing all conference consoles

The automatic initialization allows you to initialize all conference consoles

at once. In this case, however, the consoles are assigned microphone

numbers in an arbitrary order.

왘 From the central unit’s operating menu, choose “Conference”,

“

Initialize Units” and “Automatic Init” one after the other.

The text “

Please wait” is shown on the display.

왘 When the text “

Press ENTER to Save initialization” is shown

on the display, press the ENTER key.

All connected conference consoles are initialized automatically and any

previous configuration is deleted.

>Volume =

P1 P2 P3 P4 P5 P6

Conference

4 Initialize Units

Initialize Units

2 Automatic Init

Automatic Init

Please wait

Automatic Init

Press ENTER to

Save initialization

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 115 116

Comments to this Manuals

No comments

Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual Page 76

Comments to this Manuals

Related products and manuals for Microphones Sennheiser CONFERENCE SYSTEM SDC 8000