Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual download pdf (Page 27)

Operating the components of the SDC 8000 system

왘 Press the MICRO key .

If the speaker limit has not yet been reached, you can take the floor

immediately. The red signal light ring  and the “Microphone active”

LED  on your console light up permanently, indicating that you can

now take the floor.

If the speaker limit has been reached, you will join the waiting list and

the green “Request to speak” LED  on your console starts flashing. As

soon as one of the active microphones is turned off, the microphone of

the first participant from the request-to-speak list is turned on, and so

on.

When it is your turn to speak, the red signal light ring  and the

“Microphone active” LED  on your console light up permanently.

6. In “Group 4” mode:

n this mode, the speaker limit is 4.

왘 Press the MICRO key .

If the speaker limit has not yet been reached, you can take the floor

immediately. The red signal light ring  and the “Microphone active”

LED  on your console light up permanently, indicating that you can

now take the floor.

If the speaker limit has been reached, you will join the waiting list and

the green “Request to speak” LED  on your console starts flashing. As

soon as one of the active microphones is turned off, the microphone of

the first participant from the request-to-speak list is turned on, and so

on.

When it is your turn to speak, the red signal light ring  and the

“Microphone active” LED  on your console light up permanently.

7. In “No request” mode:

For this mode to function, the SDC 8000 system must be PC controlled.

In “No request” mode, you have to “apply” for a comment and wait until

the conference manager turns on your microphone. The conference

manager has total control of the microphones.

Note!

You cannot “apply” for a comment by pressing the MICRO key .

왘 Signal your intention to take the floor e.g. by raising your hand or

giving another sign.

The conference manager can either assign you the “speaking right” by

turning on your microphone or ignore your request to speak.

When the conference manager turns on you microphone, the red signal

light ring  and the “Microphone active” LED  on your console light

up permanently. When the conference manager withdraws the

“speaking right” from you, the red signal light ring  and the

“Microphone active” LED  on your console go off.









1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 115 116

Comments to this Manuals

No comments

Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual Page 27

Comments to this Manuals

Related products and manuals for Microphones Sennheiser CONFERENCE SYSTEM SDC 8000