8
Putting the bodypack transmitter into operation
Putting the bodypack transmitter into
operation
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA
size batteries or the rechargeable Sennheiser BA 2015 accupack.
왘 Push the two catches 쐉 in the direction of the arrows and open the
battery compartment cover 쐈.
왘 Insert the two batteries or the accupack as shown above.
Observe correct polarity when inserting the batteries/accupack.
왘 Close the battery compartment.
The battery compartment cover 쐈 locks into place with an audible
click.
Charging the accupack
To charge the BA 2015 accupack:
왘 Insert the bodypack transmitter into the L 2015 charger (optional
accessory).
Connecting the microphone cable/line cable
The audio input is designed for the connection of both condenser micro-
phones and other audio sources. DC powering of the condenser micro-
phones is via the audio input (3.5 mm jack socket MIC/LINE 쐃).
왘 Use one of the recommended Sennheiser microphones or the optional
CL 2 line cable.
왘 Connect the 3.5 mm jack plug 씋 from the Sennheiser microphone or
line cable to the 3.5 mm jack socket MIC/LINE 쐃.
왘 Lock the 3.5 mm jack plug by screwing down the coupling ring 씌 of
the cable.
왘 Via the operating menu, adjust the sensitivity of the microphone/line
input (see page 17).
The L 2015 charger can only charge the combination BA 2015
accupack/bodypack transmitter. Standard batteries (primary
cells) or individual rechargeable battery cells cannot be charged.
쐈
쐈
쐉
쐃
씌
씋
Comments to this Manuals