Sennheiser EM 300 G3 Instruction Manual download pdf (Page 24)

Adjustment tips

Synchronizing the bodypack transmitter with a

receiver

When synchronizing the bodypack transmitter with a receiver, please

observe the following:

왘 Only use a bodypack transmitter and a receiver from the same

frequency range (see the type plate on the transmitter and the

receiver).

왘 Make sure that the desired frequencies are listed in the enclosed

frequency information sheet.

왘 Make sure that the desired frequencies are approved and legal in your

country and, if necessary, apply for an operating license.

Synchronizing the bodypack transmitter with the receiver –

individual operation

Upon delivery, the bodypack transmitter and the receiver are synchro-

nized with each other. However, if you cannot establish a transmission link

between bodypack transmitter and receiver, you have to synchronize the

channels of the devices.

For information on automatic synchronization of the bodypack trans-

mitter with the receiver (individual operation), refer to the instruction

manual of the receiver. This information is marked with the icon.

Alternatively, you can set the channel on the bodypack transmitter

manually:

왘 Make sure that you set the bodypack transmitter to the same

frequency bank and the same channel as the receiver (see page 17).

If you still cannot establish a transmission link, refer to the chapter “If a

problem occurs ...” on page 23.

Synchronizing bodypack transmitters with receivers –

multi-channel operation

Combined with ew 300 G3 receivers, ew 300 G3 bodypack transmitters can

form transmission links that can be used in multi-channel systems. In

order to ensure an intermodulation-free transmission, use the same

frequency bank for all transmission links.

For information on automatic synchronization of bodypack transmitters

with receivers (multi-channel operation), refer to the instruction manual

of your receiver. For more information on multi-channel operation, visit

the SK 300 G3 product page at www.sennheiser.com.

Cleaning the bodypack transmitter

왘 Use a slightly damp cloth to clean the bodypack transmitter from time

to time. Do not use any solvents or cleansing agents.

CAUTION! Liquids can damage the electronics of the bodypack

transmitter!

Liquids entering the housing of the device can cause a

short-circuit and damage the electronics.

왘 Keep all liquids away from the bodypack transmitter.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Sennheiser EM 300 G3 Instruction Manual Page 24

Comments to this Manuals

Related products and manuals for Two-way radios Sennheiser EM 300 G3